Sydney Serger Crossbody Bag


**You are buying the PDF Serger Pattern ONLY **BUY ADD-ON VIDEO COURSE HERE**

Get ready to learn lots of cool things you can do with your serger while making this crossbody bag. There is a small amount of stitching with a sewing machine, but 99% is created with a serger.  Final Dimensions are 9 1/2in x 10 1/2in. While making this project you’re going to gain many skills and discover exciting techniques you can achieve by using your serger, such as:

  • Install 4.5mm – 5.0mm nylon coil zipper along top
  • 2-Thread Flatlock wide decorative stitching on front and clever back pocket detail
  • Discover best practices on working with cork material
  • Create a Narrow hem for the adjustable straps
  • Make and attach piping on the front and around corners with a unique technique

Designed using the BERNINA but can be stitched on any machine as long as your serger has the listed stitches and presser feet.

  • 4-Thread Overlock
  • 2-Thread Flatlock wide with decorative thread such as 12 wt Egyptian cotton or Pearl Crown Rayon
  • 5mm Piping
  • Sewing machine with standard foot

Materials – Non-directional prints recommended (Colors based on instructions)

  • Fabric A (Print) 1/2 yd
  • Fabric B (Rust) 1/2 yd
  • Fabric C (Blue) 1/2 yd
  • Fabric D (Cork Material) 4”x25” from
  • Fusible Interfacing 1/2 yd i.e. Pellon Shape Flex
  • Foam 1/3 yd Foam i.e. Soft and Stable
  • Paper Backed Fusible Web 1/2″ x 10” i.e. Heat and Bond Lite
  • 48” 5mm or 3/16” Cording
  • (2) 1/2″ D-rings i.e.
  • (2) 1/2″ Swivel clips i.e.
  • (1) 1/2″ Purse Slider from
  • 14” long 4.5mm-5mm Nylon Coil Zipper i.e. from

*This is a PDF Serger Pattern and not a physical paper pattern shipped to you. You need a serger and a few specialty serger presser feet in order to make this. We do not offer refunds for digital products, so make sure you understand what you are buying. Read our policy here.

You may also like…